Photoluminescence, FTIR and X-ray diffraction studies on undoped and Al-doped ZnO thin films grown on polycrystalline α-alumina substrates by ultrasonic spray pyrolysis

Undoped and aluminum-doped zinc oxide (ZnO) thin films have been grown on polycrystalline α-alumina substrates by ultrasonic spray pyrolysis (USP) technique using zinc acetate dihydrate and aluminum chloride hexahydrate (Al source) dissolved in methanol, ethanol and deionized water. A number of techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and photoluminescence (PL) were used to characterize the obtained ZnO thin films. It was seen that the orientation changed with increase in substrate temperature. During the ZnO deposition Zn source reacted with polycrystalline α-Al₂O₃ substrate to form an intermediate ZnAl₂O₄ spinel layer. It has been interestingly found that the intensity of green emission at 2.48 eV remarkably increased when the obtained ZnO:Al films were deposited at 380 °C. The FTIR absorbance intensity of spectroscopic band at 447±6 cm⁻¹ is very sensitive to oxygen sublattice disorder resulting from non-stoichiometry, which is consistent with the result of PL characterization.     

Aufbau und Erprobung von Flächenstrahlungsquellen als Sekimdärnormale zur Prüfung von Kontaminationsmeßgeraten für Betastrahler und zur Beglauhigung von Flächenstrahlungsquellen als Normale

Zur Prüfung von Kontaminationsmeβgeräten und zur Beglaubigung von Flächenstrahlungsquellen als Normale wurden im Deutscheti Amt für Meβwesen und Warenprüfung zwei Sälze von Flächenstrahlungsquellen mil den Betastrahlen ⁹⁰Sr/⁹⁰Y, ²⁰¹Tl und ⁶⁰Co angefertigt. Durch das dabei verwendete Herstellungsverfahren, bei dem je ein Tropfen rudioakliver Lösung in ein Feld eines vorgegebenen Rasters gebracht wurde, konnte eine sehr gleichmäβige Verteilung der akliven Substanz über die Quellenfläche erreicht und eine unmiltelbare Bestimmung der Flächenaktivitätswerte ermöglicht werden. Der besondere Aufbau der Flächenstrahlungsquellen geslatlet es, auf einfache Weise Meβfehler bei Kontaminationsme βgeräten, die durch das Material der Unterlage, auf dem sich die aktive Substanz befindet, und durch die Dicke der akliven Schicht hervorgerufen tcerden, zu erfassen oder zu eliminieren.     

Isotopenverdünnungsanalytische Multielementanalyse mit der Funkenquellen-Massenspektrographie

Es wird ein Verfahren zur Isotopenverdünnungsanalyse mit stabilen Isotopen unter Verwendung einer Funkenionenquelle und einem doppelfokussierenden Massenspektrographen beschrieben, welches die gleichzeitige Analyse mehrerer Elemente in pulverförmigen Feststoffen erlaubt.

Die Leistungsfähigkeit des Analysenverfahrens wild am Beispiel der Spurenanalyse geologischer Standardproben demonstriert.

Das Analysenverfahren erlaubt die Bestimmung von Spurenkonzentrationen bis in den ppb-Bereich mit Standardabweichungen zwischen 2 und 10%.     

EPR and optical spectra of cupric ions doped in powder strontium maleate tetrahydrate and magnesium Bis (hydrogen maleate) hexahydrate

Abstract

EPR spectra of Cu²⁺ ions doped in a strontium maleate tetrahydrate and magnesium bis (hydrogen maleate) hexahydrate have been studied in X-band at room temperature and at liquid nitrogen temperature. Spin-Hamiltonian parameters have been calculated. Molecular orbital coefficients are obtained by correlating optical absorption data with EPR results.     

Theoretical investigation of phase transition properties in strontium chalcogenides using potential model

The Born–Mayer potential has been employed to predict the phase transition pressure in four strontium monochalcogenides, namely, SrO, SrS, SrSe, and SrTe, which crystallize in the NaCl (B1) phase and with the application of pressure, transforms to the CsCl (B2) phase. The compression, bulk modulus and the first-order pressure derivative of bulk modulus have also been calculated and compared with the available experimental and other theoretical results. The calculated values of transition pressure and other elastic properties predict that the hardness and strength parameters depend on the crystal structure and have the different values for different structures.     

Nonlinear optical properties of strontium tartrato‐antimonate(III) dihydrate,Sr[Sb2{(+)‐C4H2O6}2]·2H2O

The tensor of nonlinear optical susceptibility for second harmonic generation [d^SHG _ijk ] of hexagonal (point group 6) strontium tartrato‐antimonate(III) dihydrate, Sr[Sb₂{(+)‐C₄H₂O₆}₂]·2H₂O, was determined using the Maker fringes method and a Nd:YAG laser with a wavelength of 1064 nm. The largest component of the tensor d^SHG ₃₃₃ amounts two times d^SHG ₁₁₁ of α‐quartz. Effective nonlinear optical susceptibility d^SHG _eff is given for phase matching type I for several wavelengths (for type II d^SHG _eff is nearly zero). The thermal stability of crystals of Sr[Sb₂{(+)‐C₄H₂O₆}₂]·2H₂O was determined in the temperature range from 153 K to 573 K by means of thermal expansion measurements and thermogravimetry. The temperature dependence of thermal expansion coefficients is given in the range from 153 K to 293 K. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A simple two‐stage column chromatographic separation scheme for strontium,lead, neodymium and hafnium isotope analyses in geological samples by thermal ionization mass spectrometry or multi‐collector inductively coupled plasma mass spectrometry

Here, a two‐stage column separation scheme is developed for the concomitant isolation of Sr, Pb, Nd, and Hf from geological samples. The first column, which consists of three resin layers (AG50W‐X8 ion exchange resin + Ln specific resin + Sr specific resin), separates the high field strength element + rare earth element, Sr and Pb from the matrices. Subsequently, Nd and Hf are further separated from the high field strength element + rare earth element fraction on the second column using 1 mL of Ln specific resin. The two‐stage column process can be completed within about seven and a half hours for a batch of samples (20–30). The separated Sr fraction was ready for isotope ratio measurements by thermal ionization mass spectrometry. The Pb, Nd, and Hf fractions were converted to nitrate prior to isotopic analyses by multi‐collector inductively coupled plasma mass spectrometry. The feasibility of this new procedure is confirmed by the analyses of four international rock standards (BCR‐2, AGV‐2, BHVO‐2, and JB‐3), which yielded isotope ratios that were in good agreement with other published data.     

Oxygen Plasma Technology-Assisted Preparation of Three-Dimensional Reduced Graphene Oxide/Polypyrrole/Strontium Composite Scaffold for Repair of Bone Defects Caused by Osteoporosis

Repairs of bone defects caused by osteoporosis have always relied on bone tissue engineering. However, the preparation of composite tissue engineering scaffolds with a three-dimensional (3D) macroporous structure poses huge challenges in achieving osteoconduction and osteoinduction for repairing bone defects caused by osteoporosis. In the current study, a three-dimensional macroporous (150–300 μm) reduced graphene oxide/polypyrrole composite scaffold modified by strontium (Sr) (3D rGO/PPY/Sr) was successfully prepared using the oxygen plasma technology-assisted method, which is simple, safe, and inexpensive. The findings of the MTT assay and AO/EB fluorescence double staining showed that 3D rGO/PPY/Sr has a good biocompatibility and effectively promoted MC3T3-E1 cell proliferation. Furthermore, the ALP assay and alizarin red staining showed that 3D rGO/PPY/Sr increased the expression levels of ALP activity and the formation of calcified nodules. The desirable biocompatibility, osteoconduction, and osteoinduction abilities, assure that the 3D macroporous rGO/PPY/Sr composite scaffold offers promising potential for use in the repair of bone defects caused by osteoporosis in bone tissue engineering.     

A Highly Lewis Acidic Strontium ansa-Arene Complex for Lewis Acid Catalysis and Isobutylene Polymerization

The potential of a dicationic strontium ansa-arene complex for Lewis acid catalysis has been explored. The key to its synthesis was a simple salt metathesis from SrI₂ and 2 Ag[Al(OR^F)₄], giving the base-free strontium-perfluoroalkoxyaluminate Sr[Al(OR^F)₄]₂ (OR^F=OC(CF₃)₃). Addition of an ansa-arene yielded the highly Lewis acidic, dicationic strontium ansa-arene complex. In preliminary experiments, the complex was successfully applied as a catalyst in CO₂-reduction to CH₄ and a surprisingly controlled isobutylene polymerization reaction.     

Microstructure and dielectric study of pure BST and doped BSTF ceramic materials by broadband dielectric spectroscopy

Pure BST and doped BSTF (with BSTF2: Fe₂O₃ 2 wt % and BSTF4: Fe₂O₃ 4 wt %) ceramics were prepared by solid state reaction. XRD pattern showed the different phases were formed depend on the weight percent of Fe₂O₃. The crystal size and lattice parameters increased while the lattice strain decreased. The topography of the sintered samples shows increase of the grain size with increasing Fe₂O₃ ratio and hence enhances the compaction of ceramics. Broadband dielectric spectroscopy was employed to investigate the effect of magnetite nanoparticle on the dielectric properties of the pure BST ceramic. The interfacial polarization and the conductivity contribution reflect the high values of permittivity and its gradual increase as frequency decreases. The two BSTF samples show relaxation peak dynamic originated from presence of immobile species/electrons at low temperatures and defects/vacancies results from the formation of oxygen vacancies originates from the spontaneous change in oxidation states of Fe ions (Fe ^3+/Fe²⁺) at high temperatures. The relaxation rate obeys Arrhenius law at high temperatures in case of BST sample with activation energy 225 kJ/mol. This high value of activation energy at higher temperatures reflects and confirms the slowed down of the dynamics at the interphase and the decoupling nature of the OH-dynamic and the interfacial polarization.